Stretch Tent Q2 Complete Set from 14 to 210 people

The elasticity and movable poles allow you to quickly adjust the shape, height and entrances, open for an airy pavilion or partially closed for wind and rain.
Stretch the fabric evenly and create clear drainage lines to prevent water pockets, especially with larger spans.
In windy conditions, always anchor the windward side first and provide additional security with correct angles and sufficient pegs.
Larger setups can be erected by two people in approximately 1 to 2 hours, depending on size and terrain.

Clean with lukewarm water and a soft brush, avoid aggressive cleaners to protect the coating.
Always allow the cloth to dry completely before storing it; this is important for mold prevention during seasonal use.
Store in a dry and ventilated place, and keep the canvas out of direct sunlight for prolonged periods during storage to preserve color.
Regularly check tension points, seams and contact areas and remove sand and dirt to reduce wear.

For a complete setup you will need poles, pegs and a rigging set, which are available separately as each location is different.
Choice of aluminium posts or wooden posts such as eucalyptus or chestnut, depending on appearance and availability.
Rectangular side walls with or without entrance and triangular side walls are available for additional shelter and division.
Gutter systems are available to connect two tents or to seamlessly attach a tent to a building.
Handy tools such as a pole lifter, peg puller and protective tarpaulin make assembly and disassembly faster and neater.

The Stretch Q2 is a medium-duty stretch tent for intensive residential, light commercial and seasonal use, suitable for leaving pitched for weeks to months.
Made of three-layer stretch fabric of 560 g per m2 with waterproof coating on the inside and outside, 100 percent waterproof with a water column of 1600 mm.
UV resistant up to index 8, flame retardant and certified according to M2 and B1, among others, mould resistant through antimicrobial treatment and water and dirt repellent through extra coating.
Heat-welded and stitched seams increase durability and reduce leakage points, designed for winds up to 75 km/h, with peak loads up to approximately 88 km/h when properly installed.
Can be combined with aluminum or wooden poles and suitable for modular setups with movable poles. Multiple tents can be linked together and can also be attached to a wall with a gutter system.
Standard sizes in stock 6 x 6 m, 6 x 10.5 m, 7.5 x 7.5 m, 7.5 x 10.5 m, 9 x 12 m, 10.5 x 10.5 m, 10.5 x 12 m, 10.5 x 15 m and 10.5 x 21 m, colour sand.
Surface area and fabric weight per size, 6 x 6 m 36 m2 and 29 kg, 6 x 10.5 m 63 m2 and 50 kg, 7.5 x 7.5 m 56 m2 and 45 kg, 7.5 x 10.5 m 79 m2 and 63 kg, 9 x 12 m 108 m2 and 86 kg, 10.5 x 10.5 m 110 m2 and 88 kg, 10.5 x 12 m 126 m2 and 101 kg, 10.5 x 15 m 158 m2 and 126 kg, 10.5 x 21 m 220 m2 and 176 kg.